Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2009 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Tech help re right half axle support bearing 850

posted by  perryg on  Wed Jul 16 03:05 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri May 16 17:14 CST 2014
[RELATED]

Need some input from any techs out there. Am planning to replace the support bearing and inner and outer cv boots on my '96 855 turbo. Ordered the parts from my dealer, and have them in hand. The bearing is Volvo part number 3502019. It seems odd to me that the axle diameter at the boot ends is approx 1 inch, but the bearing I have has a center diameter of approx 1 and 3/4 inches. Does the axle expand significantly at the site of the bearing to fit this large bearing, or is there an adapter on the axle to bring it up to size, or have I been given the wrong bearing?

Many thanks for your help in advance,

Perry


'96 855 turbo IPD sways, Volvo strut tower brace, E-code headlights, side markers, Amsoil fluids and air cleaner, sound deadened and major audio upgrades






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Tech help re right half axle support bearing [850]
posted by  perryg  on Wed Jul 16 03:05 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.