The rear wiper on my wagon quit working a couple of weeks ago. This evening, I retrieved the Haynes manual and set about removing the interior panel. Despite being careful, I will now need a new set of interior panel clips.
I measured 13+ volts across two of the connector plug terminals with the wip switch on. Is the wiper motor the only piece left - ie needs replacement? I notice that the 13 volts are constant, even though the wiper is intermittent when it operates.
Anybody had any experience with this? I searched the archives, but did not find anything relevant.
TIA
Neil
--
1997 850 awd, 5 speed manual
|