Okay, just finished the RF axle replacement, gee, vibration during accel is gone. Now for the RWD, we also have an 06 xc70, and comparing how they handle the 07 has no RWD.

Yes, this is a Haldex system. My first question is if there is an available tool to 1: Talk to the DEM, or even better, also reset/program the DEM once the module is repaired/replaced.

My intent for now is to check the wiring, and see if the pump motor actually works or is shorted. So, even if the DEM is dead, I'll replace the pump, temp sensor, and the DEM.

Before I go through the cost of the above any scan/program tool ideas would be greatly apreciated! This one has 130K on it, super clean.

Thanks,
jorrell