Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2004 V70-XC70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Hairline crack in fuel tank hose bib weld V70-XC70 2004

posted by  pbierre on  Mon Feb 11 19:58 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Mar 30 18:53 CST 2014
[RELATED]

After a spate of P0442s (EVAP small leak), I took my '04 XC70 to a shop for a smoke pressure test.

A hairline crack has developed where one hose bib (fuel filler vent hose) attaches to the tank body.

Was this originally a plastic heat weld? What would be the best repair option?

Keep in mind, the repair must be done in situ -- reaching in from the side thru the rear suspension trusses.
This car has AWD....too much work to drop the tank. Please compare some options....fuel-resistant epoxy?....melt plastic surface with soldering iron?....hot glue gun??? It would help to know what is the plastic material I'm trying to repair.

Under normal operation (vented fuel tank), there is no oozing of gasoline. It oozed some drips during the pressure test. So, it's a tiny crack. Enough to be picked up by EVAP test.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Hairline crack in fuel tank hose bib weld [V70-XC70][2004]
posted by  pbierre  on Mon Feb 11 19:58 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.