Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2019 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Turbo Hose from MAF to Turbo Vacuum Question- P0103 Code 850 1994

posted by  rice240 on  Mon Jan 15 15:10 CST 2018
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Aug 26 10:51 CST 2014
[RELATED]

I am having all sorts of issues chasing down a P0103 code. I have read every possible post. I have a couple of stupid questions... Be nice!

1. Is the insert that has the vacuum line, hose from breather and heating element in the hose from air box to turbo supposed to spin freely? It is in there but it can spin around. Wouldn't that let air in?

2. I did my PCV and my car only had two lower intake manifold bolts. Of course I dropped one and can't find it. Could that cause a significant vacuum leak if all of the top ones are tight and the bottom ones are not?

I did find a tear in the throttle body to IAC hose. I have ordered from Volvo $150.00!

Now my car starts fine and then dies in 20- seconds. I can force it to run with the pedal but it is misfiring. I suppose there is a big vacuum problem causing a lot of this.

I really appreciate everyone's help.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Turbo Hose from MAF to Turbo Vacuum Question- P0103 Code [850][1994]
posted by  rice240 subscriber  on Mon Jan 15 15:10 CST 2018 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.