Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2003 V70-XC70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

timing mark on crank = TDC ? V70-XC70 2004

posted by  riverbend on  Tue Sep 12 17:29 CST 2017
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 15:29 CST 2014
[RELATED]

Questions on resetting the cams, crank and vvt hubs:

When the timing mark on the crankshaft sprocket lines up with the pointer on the oil pump is that TDC or just a reference point ?

When the timing marks on the camshaft sprockets were lined up with the timing marks on the belt cover the camshaft holding tool could not be fit. The cams had to be turned ~15° to get the bolt in the two tool halves. Consequently the engine is no longer at TDC or the reference point. Where should the cam sprocket timing marks point when the camshaft holding tool is in place ?

Thanks

Greg





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New timing mark on crank = TDC ? [V70-XC70][2004]
posted by  riverbend subscriber  on Tue Sep 12 17:29 CST 2017 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.