Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2005 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

What does the circlip on clutch slave do - as I loosed mine and not eager to go back 850 1995

posted by  Three5bangers on  Thu Sep 29 12:24 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jan 17 20:50 CST 2013
[RELATED]

Well I want to grease the slave shaft end and fork ball as they creak. So I want the shaft backed out to add grease. From above it looked like I just need to pop off the circlip and having worked with cable clutches I figured there would be some free play (i.e. no tension anywhere). Then slide the slave towards the car center.

But the slave to did free up to be moved away from the clutch fork and now I want go back to BEFORE but the circlip does not want to fully reseat. After more examination it looks like the slave my be bolted into place (into block) by using mirror to look under the slave. That could be good as it might mean that my now 75 contact circlip doesn't do much. Or maybe that bolt has nothing to do with the slave.

Here is the photo, but I described it if you don't like photos.

http://s1314.photobucket.com/user/84quattro/media/volvo%20850/IMG_0052-Volvo850ClutchSlave_zps65ncvqhf.jpg.html?sort=3&o=0





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New What does the circlip on clutch slave do - as I loosed mine and not eager to go back [850][1995]
posted by  Three5bangers  on Thu Sep 29 12:24 CST 2016 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.