Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2007 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

DTC A2 153 & HO2S test 850 1995

posted by  awilson on  Mon Jul 20 20:48 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Mar 5 15:30 CST 2014
[RELATED]

I got a code 153 out of the A2 socket on 850 NA, "153 Rear HO2S signal". I read where sometimes these can be cleaned and function properly so I tried. Put it in a jar of gasoline and let it sit for a week, swirling it around regularly. Removed it and bench tested tonight. I got 3.2 ohms on the heater element which I believe is in range. However I'm confused on the voltage test. I do not have access to a graphing multi-meter, or even have min/max on mine. Heated the sensor tip to 600+ degrees and got a reading of ~.47 volts. From what I've read online it appears that it is not responding quickly enough, as when I removed the torch, it took a long time for it to respond with decreasing voltage. Am I correct in assuming that it should start dropping (almost) immediately when heat is removed ?

Thanks, Al
--
Optimist - half full, Pessimist - half empty, Engineer - The capacity is twice what it needs to be.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New DTC A2 153 & HO2S test [850][1995]
posted by  awilson subscriber  on Mon Jul 20 20:48 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.