Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2005 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Wiper arm bent? 850 1995

uid 5322's pic
posted by  alschnertz on  Sat Sep 24 07:29 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:32 CST 2014
[RELATED]

I changed the wiper blades last week.
My daughter complained that the new left side wiper was not working well.
What was happening is that the wiper would pull off the windshield for about the top 1/3 of the sweep. Very strange.

I "parked" the wipers at the top of the sweep and then pulled the new blades off. Then noticed that laying the arm (with the blade removed) back down, it doesn't even touch the glass. Probably about 3/4" away. Right side is the same way.

Wouldn't you expect the arm to still touch the glass?

Nothing appears to be bent and both arms are the same distance from the glass. In the normal "park" position (at the base of the windshield) both arms (with blades removed) will rest on the glass.

These were aftermarket wiper blades (Valvoline brand) and I suspect that has more to do with the problem than anything else. Will likely end up purchasing a new set from FCP, IPD etc., but I just thought this was unusual.

Any thoughts?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Wiper arm bent? [850][1995]
posted by  alschnertz subscriber  on Sat Sep 24 07:29 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.