Volvo AWD S70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2006 S70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rear Hub Centering w/ Aftermarket Wheels S70 1998

posted by  RepairmanJackal on  Tue Feb 23 13:31 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jun 10 09:52 CST 2014
[RELATED]

This is actually a c70, but not many people visit that forum.

My original wheels are long gone from the original owner. To make the Arelli wheels fit on the volvo hub, the rotor retaining pin was removed. I can put a machine screw in, but even the lowest-profile head keeps the wheels from seating correctly.

Because I can't hold the rear rotors on-center when I put the wheels back on, the rear hub always slips off-center when I torque the back wheels down and then I am treated to a scritch-scritch noise where the off-center hubs are rubbing against the E-Brake and calipers.

*if* I could track down a set of volvo wheels, I could put a the proper pins back in, and it'd be fine, but those have been impossible to track down.

Are the rear wheel rotors supposed to fit tightly on the hub, or is there supposed to be play?

If there is supposed to be play in the rotor, does anyone have a suggestion on how to hold the thing steady while I torque my wheels down? Some sort of adhesive, chewing gum,...?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rear Hub Centering w/ Aftermarket Wheels [S70][1998]
posted by  RepairmanJackal subscriber  on Tue Feb 23 13:31 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.