Volvo AWD S70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2008 S70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

98 S70GLT Oil Return line Removal S70

posted by  jimbob533 on  Sat Jan 16 03:37 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jan 18 15:36 CST 2010
[RELATED]

I am trying to replace the o-ring on the end of the oil return line from the Turbo but I m unable to remove the pipe. I have it loose but where it is between the other two lines I don't have the clearance to remove it. I could try to pry the one line wider with bar but am fearful I might cause a problem by crimping or breaking the line. It is the line that I think runs coolant to the turbo. Any guidance would be appreciated. I viewed the picture guide and it was very helpful but I just don't have the space to get the pipe between the two lines. thanks jimbob






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 98 S70GLT Oil Return line Removal [S70]
posted by  jimbob533  on Sat Jan 16 03:37 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.