Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2010 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

putting it back together, vac connection and placement of switch? 850 1994

posted by  balu on  Thu May 7 10:40 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jun 21 12:44 CST 2013
[RELATED]

Hello,

I am putting together a 94 850 Turbo after a head job, and there are a few items that I am not sure where to put. They do not show on the pictures I took before I took it all apart, as other items obscure the view.
One of them is a vacuum switch or sensor: it has 3 vacuum lines that go to it on one end, and the other end has an electrical connector. Its bracket has two boltholes, where do I attach it?
The other is a vacuum line coming from the left fender, passes under the hood latch and goes toward the radiator. Where does this connect?
Thanks,

Balu






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New putting it back together, vac connection and placement of switch? [850][1994]
posted by  balu subscriber  on Thu May 7 10:40 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.