Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2023 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rear bumper removal 850 1997

posted by  Kaz on  Sat Feb 16 03:08 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Feb 23 03:37 CST 2008
[RELATED]

Help. I'm currently trying to remove my rear bumper on my 97 850. (and it's cold in New England today) I removed the two long bolts that hold the aluminum main bumper frame to the passenger and driver side frame rails. The entire bumper assempbly seems to be loose. The only thing I see holding it are three pop rivets by each rear wheel well which connect the bumper trim to the rear wheel plastic lining. Does any one know if there is anything else I need to disconnect to remove the entire rear bumper/cover as one assembly. I obviously don't to rip anything off. Thanks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rear bumper removal [850][1997]
posted by  Kaz  on Sat Feb 16 03:08 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.