|
BRAKE FAILURE STOP SAFELY ASAP
CRUISE CONTROL STOPS OPERATING,
SPEEDOMETER FAILS,
AUTO GEARBOX WONT CHANGE DOWN...ETC,
SEEMS TO BE A TEMPERATURE PROBLEM......IVE GOT IT SUSSED AT LAST,
THE ABS MODULE MOUNTED UNDER THE BLOCK IS POORLY SOLDERED AT MANUFACTURE,
I SUSPECT LEAD FREE SOLDER IS USED,
TO FREE YOURSELF OF THIS INTERNIMABLE CURSE FOLLOW MY INSRUCTIONS....
REMOVE AIR FILTER/BOX PIPES ETC, REMOVE THE FOUR BOLTS THAT HOLD THE ECU UNIT
TO THE BOTTOM OF THE ABS PUMP, ALSO THE MULTIWAY CONNECTOR, DONT FORGET TO DISCONNECT THE BATTERY BEBORE DOING THIS, ROMOVE MOTOR PLUG, DRAW UNIT DOWN AND LIBERATE FROM CAR.
THE UNIT IS A COWSON TO GET INTO, BUT ONCE YOU HAVE RE SOLDER ALL THE BIG CONNECTORS,REGULATORS,DIODES ETC RE SEAL AND RE FIT, JOB DONE....
IVE DONE THIS IT WORKED FOR ME..GONE NOW IS THE CURSE.
GOOD LUCK.
|
