Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2017 V70-XC70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

P0300 and P0301 V70-XC70

posted by  e21Pilot on  Thu Dec 14 19:56 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Sep 27 01:59 CST 2014
[RELATED]

I finally got my OBDII scanner working. The only code I could pull from the computer was O0300. I then reset the CEL (nice to have this capability finally!)

However, when I started the engine back up it stalled. I started it again and it ran rough as it had done before. I checked the code again and I got a P0301 this time.

I know this means cylinder #1 is misfiring. I know the ignition module is getting 12v on the red wire. Is there any way to check the signals on the other two wires? I'm wondering what the best way is to troubleshoot this misfire?

Thanks,

RGW






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New P0300 and P0301 [V70-XC70]
posted by  e21Pilot  on Thu Dec 14 19:56 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.