Volvo AWD S70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2005 S70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

PO 410 engine code secondary air injection S70

posted by  Paulii on  Wed Mar 29 11:15 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jun 6 03:04 CST 2014
[RELATED]

Hello all, I have been chasing this trouble code for a few weeks now and it seems to be taking longer to turn on now with a few replacement parts, but it still comes on after a 140 to a 170 miles of driving. It is driving me nuts!
I have replaced the check valve, I have cleaned the connector and checked the air pump. I have replaced the mounts on the air pump. I have checked the vacuum line to and from the solonoid. I have cleaned and lubed the connector to the solonoid. I have checked the solonoid to make sure it works. I replaced the O2 sensor because it was reading a little slow, so far the light still comes on. Anybody have any insight to this simple problem. Thanks, Pauli






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New PO 410 engine code secondary air injection [S70]
posted by  Paulii  on Wed Mar 29 11:15 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.