I was attempting to replace the lights in the electronic climate control unit per instructions from the Brickboard. After removing the 5 screws, I still couldn't get the face plate to come off the unit. I ended up replacing the bulbs from the back, but sometime during the pulling of the face plate, the fan switch got screwed up - it slides fine but it won't stay in position, it springs back towards the center. When I plug the unit in, the fan is stuck on a high setting. I still can't get the faceplate off to see how the switch attaches. Can anyone tell me what I need to do to get the fan switch to operate properly again - and how the face plate is supposed to come off after the 5 screws are removed? Thanks very much in advance - this is my parents' car, I need to stick to RWD!
Zack
1980 245DL M46 277k
1988 745T+ M46 209k
working on 1993 850GLT 5spd 138k
|