Volvo AWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2006

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

CV joint retainer clip: What do you do to the clip in order to remove outer CV Joint? 95 850

posted by  springsman on  Mon Oct 31 09:18 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Aug 20 20:00 CST 2013
[RELATED]

Hello all,

I've got the trans axle off from the hub and now I need to slip off the outer CV joint for replacement.

One problem: The technique shown for spreading the retainer clip (slip a screw driver between the clip and spread the clip)doesn't work for me.

I've tried the screw driver, I've tried retainer clip pliers, I've tried a needle nose pliers. I spread the retainer clip, then at the same time pounded the CV joint (I'm replacing the joint).

Any help is greatly appreciated.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New CV joint retainer clip: What do you do to the clip in order to remove outer CV Joint? 95 850
posted by  springsman  on Mon Oct 31 09:18 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.