Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2004 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

A/C receiver dryer removal 850

posted by  fauteux on  Sun Aug 7 12:48 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Mar 8 11:57 CST 2009
[RELATED]

I can't get the spring coupler to release off the receiver dryer. I am using the proper 5/8 tool. I've put plenty of wd40 into the spring side. Do I have to remove the connection to the compressor to get more play? I know that's what the manual states, but I have plenty of play once I disconnet the receiver bracket.

I realize I'm suppose to be pressing in the tool into the garter spring while pulling on the pipe at the same time. How much force do I use? How can I increase the leverage? I don't want to damage the female end coming from the pipe that goes to the firewall.

Any help would be much appreciated.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    A/C receiver dryer removal 850

    posted by  someone claiming to be jim on  Sun Aug 7 15:47 CST 2005 [RELATED]

    Try pressing IN on the pipe first while pushing on the tool, then when the tool enters the cavity, pull on the pipe.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.