Volvo AWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2012

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

SCAN-TECH control arms for 1998 S70

posted by  Boobaka on  Wed Jun 29 08:01 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Im in the market for a new set of control arms. The SCAN TECH arms are priced less than half the dealer part but I cant help bit to feel theres a reason for that. Has anyone had any positive/negative experieinces with these? Or can anyone recommend a different brand? Just to be clear, im looking for the ones that have the bushings & ball joints pressed in.

Thanks, Matt








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    SCAN-TECH control arms for 1998 S70

    posted by  someone claiming to be driver8 on  Wed Jun 29 16:24 CST 2005 [RELATED]

    i tried the scan tech sway bar links and they wore out quickly. made me decide to go oem on the control arms since it should be an infrequent replacement.








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      SCAN-TECH control arms for 1998 S70

      posted by  Pete Nowak on  Wed Jun 29 16:49 CST 2005
      Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

      About 2 mos ago I put in a pair of Beck Arnley control arms in 97 850. So far so good and my mechanic tells me they're good quality.

      Haven't checked the Scan Tech's, but the Becks run between $126 - $151 a piece.






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.