Volvo AWD S40-V40 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2012 S40-V40 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

2001 S40 Brakes S40-V40

posted by  tex599 on  Thu May 26 11:13 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I am getting ready to replace the pads on my S40 for the first time and have several questions.

Are there any special tools needed?

Can you compress the calipers with a c-clamp like most cars?

Any other advice would be appreciated.

Thanks,

SWS








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    2001 S40 Brakes S40-V40

    posted by  mormit on  Fri May 27 15:27 CST 2005
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Sat Jun 7 18:36 CST 2014
    [RELATED]

    The rear calipers need to rotate while being pushed in but I had perfect results using a 6in C-clamp. Just snug it down a little, back off, then crank down again and the piston will rotate freely while being pushed bck. No special tool.

    I used Mintex pads from FCPGroton and am very happy with them. Braking is just as good as stock and the wheels stay cleaner.

    mormit
    --
    85 245DL 260,000mi V15cam It takes a licking and keeps on ticking, 02 S40 Mmmmmm,







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.