Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2011 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Control Arm brand? 850

FCP Groton carries the following two brands of control arms, Meyle or Scan tech.
The meyle goes for $95 and the Scan tech $75. Does anyone have any experience with either of these two on their 850?
Not sure which is better. I have read a few negative posts about Scan tech products recently.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Control Arm brand? 850

I'd spring for the factory part on a critical application like this. Just my opinion...








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Control Arm brand? 850

I have had good luck with the Meyle products on both Volvo and BMW. The Scan Tech stuff can be ok but it can also leave a little something to be desired.

Mark








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Control Arm brand? V70-XC70 1998

I replaced mine with Scan Tech and I'm not having a problem of any kind. There does seem to be some debate on their durability though.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.