Volvo AWD S70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2004 S70 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

99 S70 Rear Brakes S70

posted by  Forsythe99x on  Wed Mar 30 02:45 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Dec 2 07:17 CST 2012
[RELATED]

I went to put on new rear pads last night and noticed that the break line was a solid piece of tubing not hose like the front. Do I just simply unscrew the tubing so I can remove the caliper or is there some other process I need to follow.

Thanks,
John

'95 850 113K
'99 S70 89K








  REPLY TO THIS MESSAGE    PRINT   SAVE 

99 S70 Rear Brakes S70

posted by  someone claiming to be bob on  Wed Mar 30 03:08 CST 2005 [RELATED]

2WD? If 2WD you do not have to unscrew the caliper. Just drive out the pins that retain the pads. If you are replacing rotors, unscrew the caliper and leave the line conected, and hang the caliper with wire while you work on the rotors.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.