Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2002 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Metal sounding rattle coming from the glove box? 850 1996

Hello,

I know this is the V70 forum, but I'm hoping somebody has had the same expience that I'm having with my 1996 850 GLT Wagon with 194,000 on the clock. About 10K ago I replaced the original glove box with a new Volvo OEM. Thereafter I started to hear a metal sounding rattle coming from the glove box, apparently where the "A" column and the dashboard meet. I took the new glove book out to see if I had knock something loose. I found nothing and put the box back in and made sure all the retaining screws were snug. The noise continued.

I demonstrated the noise to my independant Volvo mechanic. He took the glove box out and a portion of the dashboard, but could not identify where the noise was coming from. In fact, while working on the car, the nose went away. He thought that maybe inadvertently, he had fixed it. He returned the car - N/C. A week or two later, the noise returned. It sounds exactly the same, no change in tone or pitch. The noise comes and goes. Has anyone had a similar experience, and if you so, what did you do? By the way, I bought this car new, and it has never been involved in a head-on collesion, or for that matter any type of collision. I say this, I'm keeping my fingers crossed. Thanks in advance to those who reply.

Hugh








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Metal sounding rattle coming from the glove box? 850 1996

My 95 (141K) has a significant rattle caused by the left hand hinge on the glove box door (if I hold it firm the rattle disappears). As you know, the vibration of the 5 cylinder contributes mightily. If I can't tighten it, I will use felt or rubber to fill and insulate around the hinge. Good luck.
Z








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Metal sounding rattle coming from the glove box? 850 1996

Thanks Z!

Hugh








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Metal sounding rattle coming from the glove box? 850 1996

common problem in 850/70 series.

Try adding 3/8" or 1/2" felt tape to the areas of the dashboard that come in contact with the windshield and A pillar areas.
--
'88 240, '92 745, '98 v70 John, Tampa Bay








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Metal sounding rattle coming from the glove box? 850 1996

JDA2000, Thanks, I will, Hugh








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Metal sounding rattle coming from the glove box? 850 1996

HI, My 96 850 dose the same thing, I took the glove box out to replace the blower motor looked around felt around could not find a thing. I am taking it in to get the evap coil replaced due to a/c shutting down now and then, sooo I want them to find out what that metal rattle is. I have read other posts with people that have the same prob, have not seen any solutions yet. good luck. if volvo figures out what it is will post it. kelly








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Metal sounding rattle coming from the glove box? 850 1996

Kelly,

Thanks, I will. If I find the answer, I will post it. It's nice to know I'm not alone with this experience.

Hugh







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.