Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2001 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

A/C condenser fix assistance needed, Intercooler too? 850 1995

posted by  Michael S. on  Tue May 4 04:35 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Car: '95 850 Turbo.
My condenser took a hit and got punctured. I tried welding the hole to no avail. Can a used condenser be installed? Or are there issues with installing a used "dirty" condenser. I'm told that you have to change the dryer any time the system is opened so that moisture doesn't cause a problem. I thought the evac process removed the air and moisture is that not true?

Any tips in this matter would be appreciated.

2nd question. IF I'm replacing the condenser would it be easy to install a better intercooler at the same time? Anyone have tips on what performance IC to use and costs?

Thanks,
Michael S.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    A/C condenser fix assistance needed, Intercooler too? 850 1995

    posted by  someone claiming to be Chrissij on  Tue May 4 08:23 CST 2004 [RELATED]

    Don't know of any "better" intercoolers. As far as the condensor goes, as long as the used one holds a vacuum, a good AC flush takes care of any residual ick, and yes...you should replace the drier if your system has been exposed to the atmosphere for any length of time. It's really only "required" when replacing a compressor for warranty purposes as it also filters out bits and pieces of failing components...but what about your condensor...could a good radiator repair shop repair yours?








    •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

      A/C condenser fix assistance needed, Intercooler too? 850 1995

      posted by  Michael S. on  Tue May 4 09:16 CST 2004
      Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

      My father and I tried patching the hole with aluminium solder but we must not have gotten the entire hole patched so the condenser didn't hold.

      The shop that did the evac wants $760 with aftermarket parts to do the repair. I may try and tackle it myself, who know.

      -Michael S.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.