Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2008 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil pooling on top of head EVEN after replacing the oil cover gasket 850

posted by  pknier on  Fri Apr 23 13:37 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Nov 2 11:26 CST 2010
[RELATED]

replaced the oil cap gasket with a new one twice thinking that something may have been wrong with the first new one. Where else can the oil be coming from, this is a newly factory rebuilt engine. Where do those hole open to on the top of the head? Thanks, phil








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Oil pooling on top of head EVEN after replacing the oil cover gasket 850

    posted by  pknier on  Wed Apr 28 04:16 CST 2004
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Tue Nov 2 11:26 CST 2010
    [RELATED]

    seem to have solved the problem by installing two new rubber gaskets on the cap. wall-ah no more pooling so far.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Oil pooling on top of head EVEN after replacing the oil cover gasket 850

    posted by  Token Ring Man on  Tue Apr 27 17:22 CST 2004
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

    Take the black plastic cover off and look for oil.

    Report back.
    --
    Warren Bain - '99 V70GLT G-Valve > 80K mi, 89 300SE, '96 965 >120Kmi, near Manassas Va.. Check the 700/900 FAQ via the 'features' pull down menu. This post written with 100% recycled electrons.








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Oil pooling on top of head EVEN after replacing the oil cover gasket 850

    posted by  Lilitchpin on  Sat Apr 24 12:26 CST 2004
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 05:03 CST 2014
    [RELATED]

    Remember on Volvo PVC does not exist - you have a flame trap to check instead!








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Oil pooling on top of head EVEN after replacing the oil cover gasket 850

      posted by  someone claiming to be Chrissij on  Sat Apr 24 18:00 CST 2004 [RELATED]

      did I type pvc? I usually screw up the other way...at Lowes...in front of plumbing people!








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Oil pooling on top of head EVEN after replacing the oil cover gasket 850

    posted by  someone claiming to be Chrissij on  Fri Apr 23 16:22 CST 2004 [RELATED]

    Check your pcv...rebuilt, new, old...no matter...this is classic pcv.








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Oil pooling on top of head EVEN after replacing the oil cover gasket 850

      posted by  someone claiming to be sherm on  Tue Apr 27 17:20 CST 2004 [RELATED]

      I didn't think that the turbo had a PCV valve. Mine has oil pooling problems as well

      96 855T K/N M1 0W-40 (buffalo Winter prep)







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.