Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2009 V70-XC70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

help p108 code V70-XC70 1998

posted by  pgattuso on  Wed Feb 25 10:33 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

v70 turbo wagon. I am getting a p108 obd2 code causing check engine light. This code is defined as "MAP high pressure circuit" I don't see a map sensor, I unplugged the MAF plug and get p102. There is a sensor under the air box w/3 air lines going to it, when unplugged it gives me a different code. The code seems to come on at idle and the engine races slightly when reset while running. I have reseated every plug I can see no help. Any ideas, I have to go thru inspection and they scan the car and check engine light must illuminate when car is turned on or you fail. Thanks in advance for any suggestions
Paul






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New help p108 code [V70-XC70][1998]
posted by  pgattuso  on Wed Feb 25 10:33 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.