Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2006 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Windshield trim replacement - glue needed? 850 1994

posted by  TimWolfe on  Wed Dec 4 09:08 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

The black plastic trim that fits between the top of the windsheild and the roof of my wife's 94 850 came loose and blew off the car today. Can anyone tell me if this is a snap-in part of if it must be glued into place?

I am assuming this is a pretty straight forward DYI job. Is this a good assumption?

Any help appreciated!








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Windshield trim replacement - glue needed? 850 1994

    posted by  Brap84 on  Wed Dec 4 09:25 CST 2002
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

    I replaced mine twice, fortunately the second time, I didn't lose the trim piece -- just backed up a block and found it! They say it's snap fit, but to play it safe, apply some Plio-bond that you can get at the local ACE haredware store. Comes in a brush top glass bottle. It works well and is good to have around the house. Did this on mine 3 years ago and its still on the car!







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.