Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2003 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Side Molding getting caught on the door 850 1994

posted by  LoveMyWagon on  Wed Oct 23 16:17 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hi There

I have a 94 850 wagon, it's treated me quite well but is starting to show it's age. The black side door molding is starting to loose the clips and gets caught in the door when you open them. Has anyone had this before? Can I just replace the clips and is it easy to do, or does the entire molding have to be replaced entirely if it is starting to bend?

Any advice greatly appreciated

Thanks
AJ








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Side Molding getting caught on the door 850 1994

posted by  95850 on  Wed Oct 23 16:24 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

try pushing the molding towards the back of the car. sometimes they slide forward and hit on the door jams. you can take them off check your clips they just snap on. you can buy new trim for about $30.00 - $40.00 i think.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Side Molding getting caught on the door 850 1994

posted by  95850 on  Wed Oct 23 16:24 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

try pushing the molding towards the back of the car. sometines they slide forward and hit on the door jams. you can take them off check your clips they just snap on. you can buy new trim for about $30.00 - $40.00 i think.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Side Molding getting caught on the door 850 1994

posted by  someone claiming to be jeffery47 on  Fri Oct 25 10:27 CST 2002 [RELATED]

same thing happened to me, but the clips had lost all their grip. The metal rail on the inside was pretty much chewed up, so I bought a new moulding. It was $70, but the dealer installed it.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Side Molding getting caught on the door 850 1994

posted by  someone claiming to be jeffery47 on  Fri Oct 25 10:27 CST 2002 [RELATED]

same thing happened to me, but the clips had lost all their grip. The metal rail on the inside was pretty much chewed up, so I bought a new moulding. It was $70, but the dealer installed it.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Side Molding getting caught on the door 850 1994

posted by  someone claiming to be jeffery47 on  Fri Oct 25 10:27 CST 2002 [RELATED]

same thing happened to me, but the clips had lost all their grip. The metal rail on the inside was pretty much chewed up, so I bought a new moulding. It was $70, but the dealer installed it.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.