Volvo AWD S40-V40 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2020 S40-V40 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

S40 Control Arm size - 18mm or 15mm ??? S40-V40

posted by  someone claiming to be panatomicx on  Mon May 9 17:29 CST 2022 [RELATED]

2006 Volvo S40 2.4i . Front passenger side control arm . Seems this comes in 2 different sizes . 15mm & 18mm . Which do i want ?? Was told either would work . Not so sure about that . If I have to measure then what do I measure ?? The socket size that goes to studs nut(which is an 18mm socket) ?? Or studs diameter(which is ~ 16mm)?? Not sure why but 18mm arm is about $50 more .








  REPLY TO THIS MESSAGE    PRINT   SAVE 

S40 Control Arm size - 18mm or 15mm ??? S40-V40

posted by  someone claiming to be panatomicx on  Tue May 10 20:29 CST 2022 [RELATED]

Back Again . Ok . So I figured it out . Correct one for passenger side is 15mm . Think but not sure 18mm one would be for drivers side .







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.