Volvo AWD C70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2024 C70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Retracting rear brake pistons C70 2013

posted by  N7SC on  Sun Dec 5 06:09 CST 2021
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jul 7 14:12 CST 2013
[RELATED]

Trying to get the piston on a 2013 C70 rear brake caliper to retract so I can replace the rotor and pads, but no matter how much I turn the piston, and how hard I push, it won't go in. The cap for the brake fluid res is cracked open, and even removed once. Yet, still nothing.

What do I do, open the bleeder and use a hose to let the pressure out that way? Why is the piston turning, but not grabbing any threads (it does look like it is extended way out.).

Please, I need some help on this one, after I just put it all back together, the rear brakes were dragging so badly that I am afraid the car is not roadworthy now.
--
1955 Human, Scott; 1991 745 Turbo, Thunderbolt; 1994 940, Straxx; 2008 C70, Draco






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Retracting rear brake pistons [C70][2013]
posted by  N7SC  on Sun Dec 5 06:09 CST 2021 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.