Volvo AWD S60 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2024 S60 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

ECM-5000 S60

I have a 2.5T 2008 S60 and I started having trouble starting the car. I saw the ECM-5000 error and replaced the crankshaft sensor. I then replaced all of the coils and spark plugs. When the car if warm/hot, on a restart I still get the Hard Start syndrome with the ECM-500 error code appearing. Suggestions? The car has 105K miles.








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    ECM-5000 S60

    From Matthews Volvo site:

    " did however re-secure the (cam position sensor) harness with various zip ties to make sure it wasn't laying on the starter. The original plastic guide that the crank pos sensor and cam sensors, vacuum lines and coolant pipe are all clipped to had broken and was allowing the sensor wires to get closer to the body of the starter."

    This was from a 2007 XC70. Same engine bay design.

    --
    Keeping it running is better than buying new







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.