Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2021 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

BUMPER BRACKET BOLTS 850 1997

posted by  vesparally on  Sat Apr 17 13:10 CST 2021
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 21 18:11 CST 2014
[RELATED]

Greetings, I need to replace the rusted rear bumper brackets on my 850 wagon. looking for info on the bolts that hold the brackets to the car.(2 each).
It appears to be a M10x20-30mm,(flange head) but I need to know the thread pitch of the bolt, 1.25 or 1.5. I already have new long bolts that go through the bumper.
Thanks
Peter








  •   REPLY TO THIS MESSAGE    EDIT   PRINT   SAVE 

    posted by  someone claiming to be on  Wed Dec 31 18:00 CST 1969 [RELATED]

    You should be able to salvage the shorter bolts. The online dealers want $9.50 each. Be careful when you remove them, not too much torque. Use penetrating oil and a hammer tap on the bolt head.

    I do not know the pitch size, sorry.

    --
    Keeping it running is better than buying new



    Mark this post as an answer to my question<- Use this feature to mark quality replies to your post.




<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.