Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2003 V70-XC70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

2004 V70 AWD Head off, trying to find reason for coolant loss V70-XC70

posted by  Marlin Mangels on  Mon Jun 1 09:03 CST 2020
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 21 15:41 CST 2014
[RELATED]

With engine hot, I could see & aspirate coolant from cylinder 3. Removed head & inspected cylinder 3 sleeve for cracks, but couldn't find any. Inspected head gasket, but couldn't see any failures. Perimeter of #3 piston was cleaner than the other pistons & exhaust valves were brown, as opposed to grey on the other 4 cylinders. Cylinder 4 had more "crud" on it than the others. If there was a defect in the #3 sleeve, would be it be obvious with a magnifying glass? Would it be between the cylinders where block casting is thinner? I'm going to have the head examined at machine shop & any valves repaired, they should check for any cracks. Why would cylinder #4 look worse than the others? Thanks.
Marlin






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 2004 V70 AWD Head off, trying to find reason for coolant loss [V70-XC70]
posted by  Marlin Mangels subscriber  on Mon Jun 1 09:03 CST 2020 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.