Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2003 V70-XC70 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

re: 2001 V70 non turbo auto - crankshaft seal press tool V70-XC70 2001

Hi All,

By any chance, do you have the dimensions? I can make a copy using a 3D printer. I will send you a set if you share the information.

Thank you always.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    re: 2001 V70 non turbo auto - crankshaft seal press tool V70-XC70 2001

    I do not have the dimensions you request but aren't all seal installation tools mere striking tools with an annular contact surface?

    Specifically a piece of pipe cut squarely and cleanly with an O.D. and I.D. matching that of the seal.

    A lathe might be the tool to use to make what you need.








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      re: 2001 V70 non turbo auto - crankshaft seal press tool V70-XC70 2001

      Hi Georgia and Kira,


      https://www.youtube.com/watch?v=8o-GuuQ6dFM

      Please go to 2:51

      Do you see the press tool? I want to know that protrusion wall/fin dimensions that holds the seal lip; height & depth.

      I want to find out before I start the project. Maybe it's easy like putting seals on 240. I don't know since I have never done it on the white block.

      Thank you as always.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.