Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2005 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

suspension work 850 1997

I must have hit one heck of a bump. Mechanic reported A-arm bushing, inner tie rod, and end links all need to be done. I have received the parts, and watched all the videos. Have done end links before. Any words of advice before I dive in? Order of dismantle and reinstall? All at once?
Thanks very much








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    suspension work 850 1997


    I would do the inner tie rod after the bushing as you will definitely need an alignment after doing the inner tie rod.

    Not sure but does A-arm bushing = control arm bushing/ball joint?

    End links can be done at any time.








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      suspension work 850 1997

      Yeah, ball joint, sorry. Nut there was really stuck and had to be cut off. yuk
      Need more testing of tie rods. I didn't see anything too awful. Closer look tomorrow. Thx







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.