Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2009 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

small alternator wire 850 1997

The small alternator wire on my '97 850 T5 broke at the connection. I put on a new connection, but now the wire is about a half inch to short. Can use 14 gauge wire to make a splice? If I can't what size wire do I need to get?

Thanks








  •   REPLY TO THIS MESSAGE    EDIT   PRINT   SAVE 

    OK, as long as the spliced-in piece is of a gauge AT LEAST as heavy as the original wire, so that it doesn't cause an increase in line resistance.

    Also of importance is the method by which you make the splice. Crimp type splices are commonly used, but I prefer a linesman splice, soldered, with shrink tubing insulation.

    https://professoralexandrebelinski.files.wordpress.com/2013/02/western-union-or-linemans-splice.jpg

    Oh yeah, don't forget to slide the shrink tubing onto the wire BEFORE you twist the wires together. I never forget that step.... ;0



    Mark this post as an answer to my question<- Use this feature to mark quality replies to your post.





    •   REPLY TO THIS MESSAGE    EDIT   PRINT   SAVE 

      Thanks Chris - that's what I thought but I want to make sure that I was doing the correct thing.



      Mark this post as an answer to my question<- Use this feature to mark quality replies to your post.




<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.