Does anyone know how to carefully remove the lower dash panel covering the knee bolster without causing damage?
I think there is a screw but I can't see it
Andrew

On the drivers side, it is a single torx centered in the edge of the panel (closest to the steering column). You take that screw out, pivot the front edge of the piece downward and pull towards you and the rear of the car. The rest is held on with various tabs and slots. You do have to unplug or remove the light mounted in the panel (on either driver or passenger sides).

On the passenger side, you pull the glovebox to access two screws holding tabs for the knee panel then pivot downward slightly and pull towards you.

Thank you
It's all done and works well. I replaced both the blower and resistor
Andrew