Volvo AWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2003

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Barestart - bypass sensors and ECU via OBD

uid 51415's pic
posted by  andybbrown on  Wed Apr 29 11:40 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 06:08 CST 2014
[RELATED]

Anyone heard of the bypass you can do by putting a wire between two of the OBD pinslots?
This turns off the computer parts of the car, ie no sensors, so you can set the car up mechanically and your sensors aren't adjusting your timing and instigating other non-existent failures.








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Barestart - bypass sensors and ECU via OBD

    posted by  KlausC on  Wed Apr 29 19:10 CST 2015
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 10:15 CST 2014
    [RELATED]

    That's a new one. How would you adjust the timing when there is no distributer? Again, how would you adjust the amount of fuel going through the injectors without a computer.

    I put in a bypass for the SAS system, but that was in a 1996 and 1998.

    There are intelligent OBD scanners that allow overrides to simulate different conditions, but those scanners are not cheap and a person really has to know what is going on.
    --
    My back feels better when I sit in a Volvo seat







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.