Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2013 V70-XC70 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

O2 sensor V70-XC70 1998

posted by  someone claiming to be Enzo on  Wed Feb 11 18:26 CST 2015 [RELATED]

I have P0133 error code (CEL). Bank 1 O2 sensor.
Where is it located on 1998 V70 ?
How do I replace it? From under the car or from the top?
Thanks!








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    O2 sensor V70-XC70 1998

    posted by  KlausC on  Wed Feb 11 21:13 CST 2015
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 10:15 CST 2014
    [RELATED]

    There are probably some Youtube videos that show O2 sensor replacements. Your car has 2 sensors, before and after the cat.
    The p0133 is for the front O2 sensor.

    The plug for both sensors are on top of the transmission and close to the firewall. If you have a turbo, it will be difficult to see them. The grey plug is for the rear sensor.

    Best bet, get under the car, passenger side and look up at the sensor. I had good luck with a 7/8" attachment designed for sensor removal.

    This FCP video is a bit quick, just scroll down to seee the video box:
    https://www.fcpeuro.com/products/volvo-oxygen-sensor-front-850-c70-s70-v70-15097
    --
    My name is Klaus and I am a V♂lv♂holic








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      O2 sensor V70-XC70 1998

      posted by  someone claiming to be Enzo on  Thu Feb 12 10:26 CST 2015 [RELATED]

      Thanks Klaus.
      Do you know the correct part number for bank1 O2 sensor? There are many available. Some require extra cable extensions...some do not.
      I just want to make sure I get the right one.







      •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

        O2 sensor V70-XC70 1998

        posted by  KlausC on  Thu Feb 12 10:59 CST 2015
        Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
        last visit: Fri Oct 24 10:15 CST 2014
        [RELATED]

        Turbo/non turbo? According to FCP fitment guide, just the early V70s needed the extension - they say 1997, which is not in the USA.
        --
        My name is Klaus and I am a V♂lv♂holic








        •   REPLY TO THIS MESSAGE    PRINT   SAVE 

          O2 sensor V70-XC70 1998

          posted by  someone claiming to be Enzo on  Thu Feb 12 15:07 CST 2015 [RELATED]

          It's non turbo 1998 model. Plain vanilla FWD.








          •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

            O2 sensor V70-XC70 1998

            posted by  KlausC on  Thu Feb 12 15:35 CST 2015
            Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
            last visit: Fri Oct 24 10:15 CST 2014
            [RELATED]

            I suggest calling a Volvo parts department and asking them nicely for the part number and if the extra wire is needed. Keep your VIN handy, they might ask for the trailing numbers.
            --
            My name is Klaus and I am a V♂lv♂holic







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.