Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2016 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

No OBD ignition readout - What does this mean? 850 1995

posted by  jwalker on  Sun Dec 1 08:35 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jun 6 08:39 CST 2014
[RELATED]

The last 3 times I have tried to pull codes off of the A-6 ignition port I get no response. Push the button and the red light comes on but no blinks. Could this mean the ignition ECU is bad or perhaps something else? Any way to diagnose what's going on? FYI - the A-1 and A-2 ports work fine with no codes.

I am about to install a new cam position sensor but I want to make sure I'm on the right track before I throw any more parts at it. I also have a new fuel pump relay ready to go.

My car still won't start and unfortunately work etc. has been too busy for me to spend lots of time diagnosing this problem...

As always, thanks for any help!
Jim






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New No OBD ignition readout - What does this mean? [850][1995]
posted by  jwalker  on Sun Dec 1 08:35 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.