Volvo AWD XC90 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2004 XC90 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

High beams do not stay on XC90 2004

When I toggle the stalk, the high beams come on and the blue indicator light illuminates on the console, but the lights do not stay on when I let go of the stalk. (Basically, they "flash," but that's all). Any thoughts? Thanks








  REPLY TO THIS MESSAGE    PRINT   SAVE 

High beams do not stay on XC90 2004

Are you pulling or pushing, if one try the other lightly.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

High beams do not stay on XC90 2004

your xc90 has day time running lights, turn on your headlights at the switch and your high beams should stay on, had the same trouble when we got our xc70, enjoy.








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

High beams do not stay on XC90 2004

Not too sure about P2 cars, but most often you need to first turn on the headlights, at the switch. Really new cars require the turn signal stalk to be pushed forward to get high beams and pulled back for flash (auto headlights).







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.