Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2016 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Cracked manifold - Repair or Replace? 850 1994

posted by  RepairmanJackal on  Sun Mar 31 18:14 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jun 10 09:52 CST 2014
[RELATED]

It's cracked above the basket. I think it might be cracked below as well.



I can get an all-welded on new one for around $140. Would it be worth it have this one repaired?








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Cracked manifold - Repair or Replace? 850 1994

    posted by  KlausC on  Sun Mar 31 18:50 CST 2013
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 10:15 CST 2014
    [RELATED]

    A really good welder might be able to save it, but for how long? The usable metal might be a bit on the thin side. FCP has a 'new' one for just over $200:

    http://www.fcpeuro.com/products/volvo-exhaust-manifold-kit-850-c70-s70-v70-9471934

    You might need some new bolts and gasket set. At least the access is easier than the turbo models.
    --
    My name is Klaus and I am a V♂lv♂holic








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Cracked manifold - Repair or Replace? 850 1994

    posted by  someone claiming to be David on  Sun Mar 31 18:47 CST 2013 [RELATED]

    Weld repairs are in that area are not forever and sometimes never work. Since it will take some labor to remove and reinstall, I would go with a new one. Why repeat the process if the repair welds fail in a few months. This Ebay link has some brand new ones for around $140.

    http://www.ebay.com/sch/i.html?_nkw=volvo+exhaust+manifold+850







    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Cracked manifold - Repair or Replace? 850 1994

      posted by  RepairmanJackal on  Sun Mar 31 20:29 CST 2013
      Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
      last visit: Tue Jun 10 09:52 CST 2014
      [RELATED]

      Thanks, I was considering one of those specifically.

      I've never trusted mended cast-iron, but for certain vintage applications it's acceptable.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.