Volvo AWD S70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2011 S70 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Low Beam/9006 bulb replacement S70 1998

You might think this would be a simple plug 'n play situation but not for me.
I bought awhile back a set of PIAA 9006, 51W, 4100k bulbs for when one of my old ones died. Well that day has come and I just went outside to switch them out, only to find that the existing bulb has some wires going into a cheap black plastic connector and then straight into the bulb. The wires look to be connected by the old spade style, male/female connectors. The new PIAA bulbs have a nice molded 90 degree bend plastic end on them. Can I still use these new PIAA bulbs? What do I need to connect to this molded end? Some adapter plug? Confusion here on what should be an easy fix.








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Low Beam/9006 bulb replacement S70 1998

    The PIAA bulbs will not fit.
    --
    My name is Klaus and I am a V♂lv♂holic








    •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

      Low Beam/9006 bulb replacement S70 1998

      Klaus,
      Don't you mean that the PIAA 9006 will not fit but a PIAA H7 bulb will?
      This was all my bad as I thought the S70 would have the same bulb as my old '95 850. I had these 9006 bulbs laying around but my old 850 was totaled by a kid rear ending me last year.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.