Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2006 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Fuel in in Intake Manifold 850

posted by  someone claiming to be shaker on  Mon Jun 11 22:35 CST 2012 [RELATED]

I have a 1994 n/a 850 and after I finished changing out the pcv system the intake manifolds floods with fuel and leaks profusely. I changed the fuel pressure regulator and tested it as well (no fuel leaking from the vacuum line to vacuum tree). Also, I removed fuse #103 and the fuse for the fuel pump and fuel continues to be delivered to the engine. It sounds like an electrical problem. Any ides or suggestions would be much appreciated.

Shaker








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Fuel in in Intake Manifold 850

    posted by  KlausC on  Tue Jun 12 20:03 CST 2012
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 10:15 CST 2014
    [RELATED]

    It doesn't make sense. Removing relay #103 will disable the fuel pump.

    There is an injector relay on the fan shroud, but if you unplugged that, then the injectors should all be closed and not working.
    --
    My name is Klaus and I am a V ♂ lv ♂ holic







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.