Volvo AWD S70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2004 S70 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Driver Side Inside Panel S70 2000

The lower half of my driver side door inside panel has popped off. I found
what looks like a broken plastic clip. Is there an easy way to reglue the panel
on and what about replacing the clip? Necesary? Looks like the glue has failed
after 12 years. Thoughts please.








  •   REPLY TO THIS MESSAGE    EDIT   PRINT   SAVE 

    Save the broken clip to glue it back on to the panel. I used liquid nails because it was handy, but it takes a while to set up.

    Here is how to remove the panel:

    http://volvospeed.com/volvo_repairs_how_tos/doors_latches/x70_latch_repair.html

    Klaus
    --
    My name is Klaus and I am a V ♂ lv ♂ holic



    Mark this post as an answer to my question<- Use this feature to mark quality replies to your post.




<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.