Volvo AWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2004

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

03 XC70 rear wiper arm

Hi,
While replacing the rear wiper blade the small fragile plastic tab(one of two) on the arm snapped off. Does this now mean that I`ll have to replace the whole arm or can I just get that section of the wiper arm?
It`ll cost a bundle if I have to get a new arm via dealersahip & there are no Volvo`s in parts yards around here.
Thanks,
Rich








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    03 XC70 rear wiper arm

    I really dislike the design the new cars have for the rear wiper. Why can't they just make them like the front window?

    Measure the width of the arm and the length of the blade. Go to a local autoparts store and see if they have a blade that will fit the smaller arm. You are looking for the new style blade with the tensioner spring inside the rubber.

    After verifying that the new style blade fits the arm, go for broke! Destroy all of the plastic until you have just the metal arm left and attach the new style blade.

    Otherwise, start calling junk yards in Eastern Canada.

    Klaus
    --
    Did you do your Random Act of Kindness today?







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.