Volvo AWD S70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2003 S70 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

s70 rear hub S70 1998

posted by  someone claiming to be BenE on  Fri Aug 26 17:17 CST 2011 [RELATED]

1998 S70 223K miles, front wheel drive only. Sounds like I need a rear hub/bearing. How are these attached? -Does a spindle through the middle of the hub and a big nut hold these on, or is it just a 4 bolt unit?
Thanks!








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    s70 rear hub S70 1998

    posted by  KlausC on  Sat Aug 27 11:28 CST 2011
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 10:15 CST 2014
    [RELATED]

    For FWD cars, the rear hub/bearings are held on by the large 20mm nut. Torque is about 88lbs and 30 degrees.

    Klaus
    --
    1967 220 belonging to C.A. lives on







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.