Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2013 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

How Hard is it to replace a valve ? 850 96

I think my car needs a valve job. How hard is it ? What is involved ?

Thanks Scott








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Re: How Hard is it to replace a valve ? 850 96

    You have to remove the cylinder head. On an 850, it's pretty involved. Special tools are needed to reassemble the head to the car and line up the cams. The valve job part can be handled by any good auto machine shop.








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Re: How Hard is it to replace a valve ? 850 96

    Gotta be thinking with your suject line and your question...why???

    Why do you need to replace a valve or a valve job? (two sorta different yet similar things in my book)








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Re: How Hard is it to replace a valve ? 850 96

    It's not a job for anyone without either ALOT of engine experience or preferably newer Volvo experience with that engine as it's nothing like their older 4 cylinder engines in comparison.

    Don't guess about a valve job, have it diagnosed by a compression test and cylinder leak down test first.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.