Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2021 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Directional light assembly 850

My left directional light assmbly fell out on the way back from Volvo.
How does it go in? just snap in ?

I couldn't see how it stayed in, so I just used silicone sealant to glue
it in until I find out a better way.

Should I cement the other one before it disappears?


Bill








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Directional light assembly 850

There is a plastic tab on the headlight side that mates with one on the headlight. If that tab breaks, get a new assembly for $25 or junk yard. Either push or pull on the tab next to the headlight and pull forward to remove.

When putting back, make sure the outside tabs fit into the fender cutouts completely.

Klaus








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Directional light assembly 850

Hi Klaus, Thanks for the respone,

I thought as much.. I didnt see any signs of screw mounting.
How does that critter break in the first place? There's no sign of
a collision?

I guess I'll see whats what when I get to the boneyard.
Meanwhile I have it taped in and the silicone is drying.

Bill







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.